Grouting - Revision history

Mpollei@gfnet.com at 16:02, 18 July 2023

2023-07-18T16:02:07Z

← Older revision		Revision as of 16:02, 18 July 2023
Line 10:		Line 10:
	<!-- Add picture caption -->		<!-- Add picture caption -->
	\|caption= Figure 15.1.2-1 Overview of Grouting Operations at Ridges Basin Dam<ref name="DS13-15">[[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting), USBR, 2014]]</ref>		\|caption= Figure 15.1.2-1 Overview of Grouting Operations at Ridges Basin Dam<ref name="DS13-15">[[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting), USBR, 2014]]</ref>
			(Image Source: USACE)
	}}		}}

Line 25:		Line 26:
	* "Void filling in foundations beneath structures		* "Void filling in foundations beneath structures
	* "Compaction grouting for densification of loose deposits or jet grouting to replace zones of loose materials		* "Compaction grouting for densification of loose deposits or jet grouting to replace zones of loose materials
	* "Pre-treatment of fractures rock foundations to enable cutoff wall construction		* "Pre-treatment of fractures [[Rock Foundations\|rock foundations]] to enable cutoff wall construction
	* "Grouting of leaking cracks or joints in structures		* "Grouting of leaking cracks or joints in structures
	* "[[Abandonment]] or backfilling of exploration and instrument holes		* "[[Abandonment]] or backfilling of exploration and instrument holes

Mpollei@gfnet.com at 23:06, 10 July 2023

2023-07-10T23:06:15Z

← Older revision		Revision as of 23:06, 10 July 2023
Line 31:		Line 31:

	==<noautolinks>Best Practices Resources</noautolinks>==		==<noautolinks>Best Practices Resources</noautolinks>==
	{{Document Icon}} [[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting), USBR~~, 2014~~]]		{{Document Icon}} [[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting), USBR]]
	{{Document Icon}} [[Design of Small Dams \| Design of Small Dams, USBR~~, 1987~~]]		{{Document Icon}} [[Design of Small Dams \| Design of Small Dams, USBR]]

	==<noautolinks>Trainings</noautolinks>==		==<noautolinks>Trainings</noautolinks>==

Rmanwaring at 23:31, 19 December 2022

2022-12-19T23:31:00Z

← Older revision		Revision as of 23:31, 19 December 2022
Line 9:		Line 9:
	\|link=		\|link=
	<!-- Add picture caption -->		<!-- Add picture caption -->
	\|caption= Figure 15.1.2-1 Overview of Grouting Operations at Ridges Basin Dam<ref name="DS13-15">[[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) (USBR, 2014)]]</ref>		\|caption= Figure 15.1.2-1 Overview of Grouting Operations at Ridges Basin Dam<ref name="DS13-15">[[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting), USBR, 2014]]</ref>
	}}		}}

	<!-- Introductory paragraph or topic page summary -->		<!-- Introductory paragraph or topic page summary -->
	"Grouting in civil works activities is performed as: (1) an element of permanent [[construction]], (2) a post-construction remedial treatment, or (3) an element of expedient construction or repair. Examples of permanent construction are curtain grouting in foundations for dams and ground stabilization of foundation materials for large buildings. Examples of post-construction remedial treatment include grouting voids under concrete structures and reducing leakage through dam foundations or abutments. Grouting is used for both temporary and permanent treatments. It should be considered in combination with other appropriate types of treatment for best results. Other types of treatment may include excavation, compaction, concrete [[cutoff]] walls, slurry trenches, impervious blankets, drainage blankets, and filter zones. Treatments also include [[Relief Wells\|relief wells]], drilled drains, sheet pile cutoff, dental concrete, drainage [[tunnels]] and galleries, underpinning, and [[structural]] foundations. Purposes of expedient grouting include repair of roadways, cofferdams, and [[stability]] and [[groundwater]] control during construction."<ref name="EM1110-2-3506">[[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506) (USACE, 2017)]]</ref>		"Grouting in civil works activities is performed as: (1) an element of permanent [[construction]], (2) a post-construction remedial treatment, or (3) an element of expedient construction or repair. Examples of permanent construction are curtain grouting in foundations for dams and ground stabilization of foundation materials for large buildings. Examples of post-construction remedial treatment include grouting voids under concrete structures and reducing leakage through dam foundations or abutments. Grouting is used for both temporary and permanent treatments. It should be considered in combination with other appropriate types of treatment for best results. Other types of treatment may include excavation, compaction, concrete [[cutoff]] walls, slurry trenches, impervious blankets, drainage blankets, and filter zones. Treatments also include [[Relief Wells\|relief wells]], drilled drains, sheet pile cutoff, dental concrete, drainage [[tunnels]] and galleries, underpinning, and [[structural]] foundations. Purposes of expedient grouting include repair of roadways, cofferdams, and [[stability]] and [[groundwater]] control during construction."<ref name="EM1110-2-3506">[[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506), USACE, 2017]]</ref>

	"Grouting is the process in injecting liquids, mixed suspensions, or semi-solid mixtures under pressure to achieve one or more desirable end results in terms of improving [[engineering]] properties. To accomplish this, the injected grout must eventually form either a gel or a solid within the treatment zone. Permeation grouting is the injection of high-mobility grouts (HMGs) into small voids within soil or rock masses, into small voids between these materials and an existing structure, and/or into small cracks or fractures within structures themselves. Void-filling grouting involves using low- (or limited) mobility grout (or grouting) (LMG) or other materials having properties suitable for effective filling of large voids. Compaction grouting is the injections of plastic, semi-solid mixtures to densify or displace deformable materials. In-situ modification or [[replacement]] includes specialized techniques such as a jet grouting or hydrofracture grouting... Depending on the specific application, grouting is used as either the primary or sole means of effecting property improvement, or it may be used in conjunction with other technologies and methods."<ref name="EM1110-2-3506"/>		"Grouting is the process in injecting liquids, mixed suspensions, or semi-solid mixtures under pressure to achieve one or more desirable end results in terms of improving [[engineering]] properties. To accomplish this, the injected grout must eventually form either a gel or a solid within the treatment zone. Permeation grouting is the injection of high-mobility grouts (HMGs) into small voids within soil or rock masses, into small voids between these materials and an existing structure, and/or into small cracks or fractures within structures themselves. Void-filling grouting involves using low- (or limited) mobility grout (or grouting) (LMG) or other materials having properties suitable for effective filling of large voids. Compaction grouting is the injections of plastic, semi-solid mixtures to densify or displace deformable materials. In-situ modification or [[replacement]] includes specialized techniques such as a jet grouting or hydrofracture grouting... Depending on the specific application, grouting is used as either the primary or sole means of effecting property improvement, or it may be used in conjunction with other technologies and methods."<ref name="EM1110-2-3506"/>
Line 31:		Line 31:

	==<noautolinks>Best Practices Resources</noautolinks>==		==<noautolinks>Best Practices Resources</noautolinks>==
	{{Document Icon}} [[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) (USBR, 2014)]]		{{Document Icon}} [[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting), USBR, 2014]]
	{{Document Icon}} [[Design of Small Dams \| Design of Small Dams (USBR, 1987)]]		{{Document Icon}} [[Design of Small Dams \| Design of Small Dams, USBR, 1987]]

	==<noautolinks>Trainings</noautolinks>==		==<noautolinks>Trainings</noautolinks>==

Rmanwaring: /* Typical Applications of Grouting for Dams and Lock Structures */

2022-12-19T23:30:09Z

Typical Applications of Grouting for Dams and Lock Structures

← Older revision		Revision as of 23:30, 19 December 2022
Line 20:		Line 20:

	==Typical Applications of Grouting for Dams and Lock Structures==		==Typical Applications of Grouting for Dams and Lock Structures==
	* Hydraulic barrier grouting to control leakage and pressure distributions (i.e., grout curtain construction)		* "Hydraulic barrier grouting to control leakage and pressure distributions (i.e., grout curtain construction)
	* Foundation consolidation grouting to reduce foundation and structure deformations under load		* "Foundation consolidation grouting to reduce foundation and structure deformations under load
	* Contact grouting of the interface between structures and foundations		* "Contact grouting of the interface between structures and foundations
	* Void filling in foundations beneath structures		* "Void filling in foundations beneath structures
	* Compaction grouting for densification of loose deposits or jet grouting to replace zones of loose materials		* "Compaction grouting for densification of loose deposits or jet grouting to replace zones of loose materials
	* Pre-treatment of fractures rock foundations to enable cutoff wall construction		* "Pre-treatment of fractures rock foundations to enable cutoff wall construction
	* Grouting of leaking cracks or joints in structures		* "Grouting of leaking cracks or joints in structures
	* [[Abandonment]] or backfilling of exploration and instrument holes		* "[[Abandonment]] or backfilling of exploration and instrument holes
	* Improvement of zones as required to facilitate dewatering and/or excavation stability<ref name="EM1110-2-3506"/>		* "Improvement of zones as required to facilitate dewatering and/or excavation stability<ref name="EM1110-2-3506"/>

	==<noautolinks>Best Practices Resources</noautolinks>==		==<noautolinks>Best Practices Resources</noautolinks>==

Grichards at 05:35, 14 December 2022

2022-12-14T05:35:47Z

← Older revision		Revision as of 05:35, 14 December 2022
Line 30:		Line 30:
	* Improvement of zones as required to facilitate dewatering and/or excavation stability<ref name="EM1110-2-3506"/>		* Improvement of zones as required to facilitate dewatering and/or excavation stability<ref name="EM1110-2-3506"/>

	==<noautolinks>[[Best Practices Resources]]<noautolinks/>==		==<noautolinks>Best Practices Resources</noautolinks>==
	{{Document Icon}} [[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) (USBR, 2014)]]		{{Document Icon}} [[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) (USBR, 2014)]]
	{{Document Icon}} [[Design of Small Dams \| Design of Small Dams (USBR, 1987)]]		{{Document Icon}} [[Design of Small Dams \| Design of Small Dams (USBR, 1987)]]

	==<noautolinks>[[Trainings]]<noautolinks/>==		==<noautolinks>Trainings</noautolinks>==
	{{Video Icon}} [[On-Demand Webinar: Introduction to Grouting for Dams]]		{{Video Icon}} [[On-Demand Webinar: Introduction to Grouting for Dams]]

Grichards at 05:35, 14 December 2022

2022-12-14T05:35:00Z

Grichards at 23:49, 5 December 2022

2022-12-05T23:49:42Z

← Older revision		Revision as of 23:49, 5 December 2022
Line 13:		Line 13:

	<!-- Introductory paragraph or topic page summary -->		<!-- Introductory paragraph or topic page summary -->
	"Grouting in civil works activities is performed as: (1) and element of permanent [[construction]], (2) a post-construction remedial treatment, or (3) an element of expedient construction or repair. Examples of permanent construction are curtain grouting in foundations for dams and ground stabilization of foundation materials for large buildings. Examples of post-construction remedial treatment include grouting voids under concrete structures and reducing leakage through dam foundations or abutments. Grouting is used for both temporary and permanent treatments. It should be considered in combination with other appropriate types of treatment for best results. Other types of treatment may include excavation, compaction, concrete [[cutoff]] walls, slurry trenches, impervious blankets, drainage blankets, and filter zones. Treatments also include [[relief wells]], drilled drains, sheet pile cutoff, dental concrete, drainage [[tunnels]] and galleries, underpinning, and [[structural]] foundations. Purposes of expedient grouting include repair of roadways, cofferdams, and [[stability]] and [[groundwater]] control during construction."<ref name="EM1110-2-3506">[[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506) (USACE, 2017)]]</ref>		"Grouting in civil works activities is performed as: (1) and element of permanent [[construction]], (2) a post-construction remedial treatment, or (3) an element of expedient construction or repair. Examples of permanent construction are curtain grouting in foundations for dams and ground stabilization of foundation materials for large buildings. Examples of post-construction remedial treatment include grouting voids under concrete structures and reducing leakage through dam foundations or abutments. Grouting is used for both temporary and permanent treatments. It should be considered in combination with other appropriate types of treatment for best results. Other types of treatment may include excavation, compaction, concrete [[cutoff]] walls, slurry trenches, impervious blankets, drainage blankets, and filter zones. Treatments also include [[Relief Wells\|relief wells]], drilled drains, sheet pile cutoff, dental concrete, drainage [[tunnels]] and galleries, underpinning, and [[structural]] foundations. Purposes of expedient grouting include repair of roadways, cofferdams, and [[stability]] and [[groundwater]] control during construction."<ref name="EM1110-2-3506">[[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506) (USACE, 2017)]]</ref>

	"Grouting is the process in injecting liquids, mixed suspensions, or semi-solid mixtures under pressure to achieve one or more desirable end results in terms of improving [[engineering]] properties. To accomplish this, the injected grout must eventually form either a gel or a solid within the treatment zone. Permeation grouting is the injection of high-mobility grouts (HMGs) into small voids within soil or rock masses, into small voids between these materials and an existing structure, and/or into small cracks or fractures within structures themselves. Void-filling grouting involves using low- (or limited) mobility grout (or grouting) (LMG) or other materials having properties suitable for effective filling of large voids. Compaction grouting is the injections of plastic, semi-solid mixtures to densify or displace deformable materials. In-situ modification or [[replacement]] includes specialized techniques such as a jet grouting or hydrofracture grouting... Depending on the specific application, grouting is used as either the primary or sole means of effecting property improvement, or it may be used in conjunction with other technologies and methods."<ref name="EM1110-2-3506"/>		"Grouting is the process in injecting liquids, mixed suspensions, or semi-solid mixtures under pressure to achieve one or more desirable end results in terms of improving [[engineering]] properties. To accomplish this, the injected grout must eventually form either a gel or a solid within the treatment zone. Permeation grouting is the injection of high-mobility grouts (HMGs) into small voids within soil or rock masses, into small voids between these materials and an existing structure, and/or into small cracks or fractures within structures themselves. Void-filling grouting involves using low- (or limited) mobility grout (or grouting) (LMG) or other materials having properties suitable for effective filling of large voids. Compaction grouting is the injections of plastic, semi-solid mixtures to densify or displace deformable materials. In-situ modification or [[replacement]] includes specialized techniques such as a jet grouting or hydrofracture grouting... Depending on the specific application, grouting is used as either the primary or sole means of effecting property improvement, or it may be used in conjunction with other technologies and methods."<ref name="EM1110-2-3506"/>

Grichards at 06:32, 18 November 2022

2022-11-18T06:32:40Z

← Older revision		Revision as of 06:32, 18 November 2022
Line 1:		Line 1:
	<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->		<!-- Delete any sections that are not necessary to your topic. Add pictures/sections as needed -->
	__NOTOC__		__NOTOC__
			[[Category:Underseepage]]
	----		----
	{{Picture		{{Picture

Rmanwaring at 17:09, 3 November 2022

2022-11-03T17:09:44Z

← Older revision		Revision as of 17:09, 3 November 2022
Line 4:		Line 4:
	{{Picture		{{Picture
	<!-- Add image file name (ex.image.jpg) -->		<!-- Add image file name (ex.image.jpg) -->
	\|image= ~~Grouting~~.~~jpg~~		\|image= GroutingOperations_RidgesBasinDam.png
	<!--Add link if applicable -->		<!--Add link if applicable -->
	\|link=		\|link=
	<!-- Add picture caption -->		<!-- Add picture caption -->
	\|caption= ~~Filling joints in a concrete bridge deck with grout~~		\|caption= Figure 15.1.2-1 Overview of Grouting Operations at Ridges Basin Dam<ref name="DS13-15">[[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) (USBR, 2014)]]</ref>
	}}		}}

	<!-- Introductory paragraph or topic page summary -->		<!-- Introductory paragraph or topic page summary -->
	"Grouting in civil works activities is performed as: (1) and element of permanent [[construction]], (2) a post-construction remedial treatment, or (3) an element of expedient construction or repair. Examples of permanent construction are curtain grouting in foundations for dams and ground stabilization of foundation materials for large buildings. Examples of post-construction remedial treatment include grouting voids under concrete structures and reducing leakage through dam foundations or abutments. Grouting is used for both temporary and permanent treatments. It should be considered in combination with other appropriate types of treatment for best results. Other types of treatment may include excavation, compaction, concrete cutoff walls, slurry trenches, impervious blankets, drainage blankets, and filter zones. Treatments also include [[relief wells]], drilled drains, sheet pile cutoff, dental concrete, drainage [[tunnels]] and galleries, underpinning, and [[structural]] foundations. Purposes of expedient grouting include repair of roadways, cofferdams, and [[stability]] and [[groundwater]] control during construction."<ref name="EM1110-2-3506">[[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506) (USACE, 2017)]]</ref>		"Grouting in civil works activities is performed as: (1) and element of permanent [[construction]], (2) a post-construction remedial treatment, or (3) an element of expedient construction or repair. Examples of permanent construction are curtain grouting in foundations for dams and ground stabilization of foundation materials for large buildings. Examples of post-construction remedial treatment include grouting voids under concrete structures and reducing leakage through dam foundations or abutments. Grouting is used for both temporary and permanent treatments. It should be considered in combination with other appropriate types of treatment for best results. Other types of treatment may include excavation, compaction, concrete [[cutoff]] walls, slurry trenches, impervious blankets, drainage blankets, and filter zones. Treatments also include [[relief wells]], drilled drains, sheet pile cutoff, dental concrete, drainage [[tunnels]] and galleries, underpinning, and [[structural]] foundations. Purposes of expedient grouting include repair of roadways, cofferdams, and [[stability]] and [[groundwater]] control during construction."<ref name="EM1110-2-3506">[[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506) (USACE, 2017)]]</ref>

	"Grouting is the process in injecting liquids, mixed suspensions, or semi-solid mixtures under pressure to achieve one or more desirable end results in terms of improving [[engineering]] properties. To accomplish this, the injected grout must eventually form either a gel or a solid within the treatment zone. Permeation grouting is the injection of high-mobility grouts (HMGs) into small voids within soil or rock masses, into small voids between these materials and an existing structure, and/or into small cracks or fractures within structures themselves. Void-filling grouting involves using low- (or limited) mobility grout (or grouting) (LMG) or other materials having properties suitable for effective filling of large voids. Compaction grouting is the injections of plastic, semi-solid mixtures to densify or displace deformable materials. In-situ modification or [[replacement]] includes specialized techniques such as a jet grouting or hydrofracture grouting... Depending on the specific application, grouting is used as either the primary or sole means of effecting property improvement, or it may be used in conjunction with other technologies and methods."<ref name="EM1110-2-3506"/>		"Grouting is the process in injecting liquids, mixed suspensions, or semi-solid mixtures under pressure to achieve one or more desirable end results in terms of improving [[engineering]] properties. To accomplish this, the injected grout must eventually form either a gel or a solid within the treatment zone. Permeation grouting is the injection of high-mobility grouts (HMGs) into small voids within soil or rock masses, into small voids between these materials and an existing structure, and/or into small cracks or fractures within structures themselves. Void-filling grouting involves using low- (or limited) mobility grout (or grouting) (LMG) or other materials having properties suitable for effective filling of large voids. Compaction grouting is the injections of plastic, semi-solid mixtures to densify or displace deformable materials. In-situ modification or [[replacement]] includes specialized techniques such as a jet grouting or hydrofracture grouting... Depending on the specific application, grouting is used as either the primary or sole means of effecting property improvement, or it may be used in conjunction with other technologies and methods."<ref name="EM1110-2-3506"/>
Line 31:		Line 31:
	==[[Best Practices Resources]]==		==[[Best Practices Resources]]==
	{{Document Icon}} [[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506) (USACE, 2017)]]		{{Document Icon}} [[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506) (USACE, 2017)]]
			{{Document Icon}} [[Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) \| Design Standards No. 13: Embankment Dams (Ch. 15: Foundation Grouting) (USBR, 2014)]]
	{{Document Icon}} [[Seepage Analysis and Control for Dams (EM 1110-2-1901) \| Seepage Analysis and Control for Dams (EM 1110-2-1901) (USACE, 1993)]]		{{Document Icon}} [[Seepage Analysis and Control for Dams (EM 1110-2-1901) \| Seepage Analysis and Control for Dams (EM 1110-2-1901) (USACE, 1993)]]
	{{Document Icon}} [[Design of Small Dams \| Design of Small Dams (USBR, 1987)]]		{{Document Icon}} [[Design of Small Dams \| Design of Small Dams (USBR, 1987)]]

Rmanwaring at 15:42, 3 November 2022

2022-11-03T15:42:04Z

← Older revision		Revision as of 15:42, 3 November 2022
Line 28:		Line 28:
	* [[Abandonment]] or backfilling of exploration and instrument holes		* [[Abandonment]] or backfilling of exploration and instrument holes
	* Improvement of zones as required to facilitate dewatering and/or excavation stability		* Improvement of zones as required to facilitate dewatering and/or excavation stability

	~~==Examples==~~
	* [[Link Name]]
	~~{{Website Icon}} [[Page Name \| Link Text]]~~
	~~{{Document Icon}} [[Page Name \| Link Text (author)]]~~
	~~{{Video Icon}} [[Page Name \| Link Text]]~~

	==[[Best Practices Resources]]==		==[[Best Practices Resources]]==
	{{Document Icon}} [[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506) (USACE, 2017)]]		{{Document Icon}} [[Grouting Technology (EM 1110-2-3506) \| Grouting Technology (EM 1110-2-3506) (USACE, 2017)]]
			{{Document Icon}} [[Seepage Analysis and Control for Dams (EM 1110-2-1901) \| Seepage Analysis and Control for Dams (EM 1110-2-1901) (USACE, 1993)]]
			{{Document Icon}} [[Design of Small Dams \| Design of Small Dams (USBR, 1987)]]

	==[[Trainings]]==		==[[Trainings]]==
			{{Video Icon}} [[On-Demand Webinar: Introduction to Grouting for Dams]]

	<!-- In the location of an in text citation, simply enclose the citation as follows: <ref> citation </ref>. Citations will automatically populate. Learn more at https://www.mediawiki.org/wiki/Help:Cite. -->		<!-- In the location of an in text citation, simply enclose the citation as follows: <ref> citation </ref>. Citations will automatically populate. Learn more at https://www.mediawiki.org/wiki/Help:Cite. -->